Cold Cure Epoxy Kit 1.5 Pint

Cold Cure was formulated to extend the number of months in which epoxy can be used outdoors, effectively down to 2°C (35°F) in 100% relative humidity.

Cold Cure is relied upon as an all-purpose epoxy resin system by boat builders, contractors, engineers, manufacturers, homeowners and artisans.

Cold Cure Cold Weather Epoxy is a 100% solids, unfilled, medium modulus, low viscosity, moisture tolerant epoxy system.

Cold Cure has a low odour and no VOCs. It is non-shrinking, flexible and has excellent resistance to cracking, abrasion, common chemicals and fatigue.

Cold Cure is clear and is compatible with most paints and clear finishes. It is an excellent gap-filling putty when mixed with thickening agents and fillers.

When cured, it can be machined, drilled, sanded and tapped.

It can be applied underwater. It is an easy to use 2:1 ratio.

It will not blush or turn milky in thin films and cures overnight.

• Mix Ratio: 2:1 by volume
• Total Solids: 100%
• Viscosity: Thin liquid
• Application Temperature Range: 2°C to 40°C (35°F to 102°F)
• Tensile Strength: 6,000 psi
• Compressive Strength: 12,000 psi
• Elongation: 11%
• Coverage: 20 sq ft/L as a coating
• Service Temperature Range: -20°C to 72°C (-4°F to 162°F)